21
SPECIAL FEATURES
USING MEMORY
DIALING
You can store up to 10 numbers in
the ET-910’s memory, then dial them
at the press of a few buttons.
Notes:
• Each phone number can be up
to 16 digits long.
• You can use either the base or
the handset to program and dial
stored numbers on the ET-910.
Storing a Number in
Memory
Note: You must complete Steps 1-3
within 30 seconds of each other. If
you do not, the ET-910 sounds a long
beep, all indicators stop flashing, and
you must start over again at Step 1.
1. Press
PROG
on the handset or
the base. The TALK indicator on
the handset or the SPKR indica-
tor on the base flashes.
2. Press the number key (
0
-
9
) of
the memory location where you
want to store the phone number.
3. Enter the phone number you
want to store (up to 16 digits).
Notes:
• To store the last number you
dialed, you can simply press
REDIAL
.
• You can store special banking
or telephone service num-
bers (such as access codes
or account numbers) in mem-
ory.
• For security purposes, we
recommend that you do not
store private numbers in
memory, such as personal
identification numbers or
passwords.
• If you have pulse service and
want to use tone dialing, enter
TONE
at the appropriate
place in the sequence of num-
bers.
• To store one or more pauses
in the memory number, see
“Storing a Pause in Memory”
on Page 22.
• Each pause or
TONE
entry
counts as one memory digit.
4. Press
MEM
(memory) to store
the number in memory. The
phone sounds a “chirping” beep
and all indicators turn off.
0
#
TONE
OPER
HOLD
FLASH
PRIVACY
MEM
REDIAL
PROG
INT.CM
SPKR
VOLUME
DIGITAL
TALK
INT.CM
OFF
PRIVACY / LOW BATT
1
4
7
2
5
8
0
3
6
9
#
GHI
PRS
TONE
ABC
JKL
TUV
OPER
DEF
MNO
WXY
HOLD
FLASH
PRIVACY
MEM
REDIAL
PROG
43-1085.fm Page 21 Tuesday, August 17, 1999 2:31 PM
