15
2. Within 30 seconds, press
#
, then
press
1
-
4
(one key after the
other) to hear the different ringer
types. The ET-910 sounds a dif-
ferent ringer type for each key.
Notes:
• To hear the currently selected
ringer type, press
0
anytime
after you press
#
during this
step.
• If the indicator above
TALK
turns off before you make
your selection, press
PROG
again then repeat this step.
3. When you hear the ringer type
you want to use, press
#
to
select it. The indicator turns off.
Repeat these steps using the other
keypad to change the base or the
handset’s ringer type.
Turning On/Off the Base’s
Ringer
If you want the ET-910’s base to ring
when a call comes in, set
RINGER
to
ON
.
If you do not want the base’s ringer to
sound, set
RINGER
to
OFF
.
Turning On/Off the
Handset’s Ringer
The ET-910’s handset is preset to
ring when a call comes in. To turn off
the handset’s ringer, follow these
steps.
1. Press
PROG
. The indicator
above
TALK
flashes.
2. Within 30 seconds, press
#
, then
5
.
Note: If the indicator above
TALK
turns off before you com-
plete this step, press
PROG
again then repeat this step.
3. Press
#
again. The indicator
turns off and the handset ringer
is now turned off.
Notes:
• To turn the handset’s ringer on
again, simply follow the steps in
“Checking/Setting the Ringer
Type” on Page 14 and select the
desired ringer type.
• If the handset’s ringer is turned
on and you press
OFF
while the
handset is ringing, the handset’s
ringer turns off for that call only,
then it automatically turns on
about 5 seconds after the call
ends. See “Making/Answering
Calls” on Page 16.
TONE
PULSE
OFF
ON
RINGER
43-1085.fm Page 15 Tuesday, August 17, 1999 2:31 PM
