6
Preparation
Using AC Power
You can power the cassette player using a regulated
3V, 300-mA AC adapter and a size H Adaptaplug™
adapter (neither supplied). Both are available at your
local RadioShack store.
Cautions:
You must use a Class 2 power source
that supplies 3V DC and delivers at
least 300 mA. Its center tip must be set
to positive and its plug must fit the cassette play-
er's DC 3V jack. Using an adapter that does not
meet these specifications could damage the cas-
sette player or the adapter.
• Always connect the AC adapter to the cassette
player before you connect it to AC power. When
you finish, disconnect the adapter from AC power
before you disconnect it from the cassette player.
1. Set the adapter’s voltage switch to 3V if neces-
sary.
2. Insert the Adaptaplug adapter into the adapter’s
cord so it reads + TIP.
3. Pull out the attached rubber plug from the
DC 3V
jack, then insert the Adaptaplug’s barrel plug into
the jack.
!
