6
Installation
This connection turns on the stereo
when you turn on the ignition or turn
the key to ACC, and turns off the
stereo when you turn off the ignition.
This prevents your vehicle's battery
from being drained if you leave the
stereo on when you turn off the igni-
tion.
4. Connect the yellow
+12V TO BAT-
TERY
wire (with the in-line fuse
holder) to your vehicle battery's pos-
itive (+) terminal or to a point in your
vehicle's fuse block that provides a
continuous source of 12 volts.
This connection provides continu-
ous power for the stereo's red anti-
theft indicator when the faceplate is
removed.
5. Cut the loop at the end of the blue
AMP REMOTE TURN ON 500MA MAX
wire, strip about
1
/
2
inch of insulation
from its end, then connect it to any
optional equipment (designed to run
from a switched source) that you
want the stereo to turn on and off
(such as a power antenna).
This wire does not provide power to
the component. It simply turns other
equipment on or off. If you do not
use this wire, secure it with a wire tie
and do not let it touch metal.
Connecting Speakers
1. Connect the gray wire to the right
speaker's positive terminal. This ter-
minal is usually marked with a plus
(+) sign or red mark.
2. Connect the gray/black wire to the
right speaker's negative terminal.
This terminal might be marked with
a minus (–) sign or it might not be
marked at all.
3. Connect the white wire to the left
speaker's positive terminal.
4. Connect the white/black wire to the
left speaker's negative terminal.
Connecting the Antenna
Connect the vehicle's antenna cable to
the stereo's antenna jack at the back of
the stereo.
Left Speaker
Right Speaker
Gray/Black (–)
White (+)
White/Black (–)
Gray (+)
Antenna Cable
12-2117.fm Page 6 Thursday, February 24, 2000 11:21 AM
