10
Basic Operation
ˆ
Basic Operation
TURNING THE STEREO
ON AND OFF
Caution: Use common sense. Do not
change your stereo's settings in heavy
traffic or during hazardous driving condi-
tions.
To turn on the stereo, turn
ON/VOL
clockwise until it clicks. To turn off the
stereo, turn
ON/VOL
counterclockwise
until it clicks.
ADJUSTING THE
SOUND/TUNING
When you listen to your stereo, adjust
the following controls to suit your listen-
ing preference and tune the stereo.
ON/VOL
— turn clockwise to increase or
counterclockwise to decrease the vol-
ume.
Warning: To protect your hearing, do
not listen at high volume levels. Slowly
increase the volume to a comfortable lis-
tening level.
BAL
— rotate the outer control to adjust
the balance between the left and right
speakers.
TONE
— rotate to decrease or increase
low sounds.
TUN
— rotate the inner control clockwise
or counterclockwise to tune to the next
station in the selected band.
RADIO OPERATION
1. Rotate
ON/VOL
clockwise until it
clicks to turn on the stereo.
2. Press
BAND
to select between AM
and FM bands. The corresponding
band indicator lights.
3. Press
MO/ST
to select FM mono or
FM stereo in the FM band. The ST
indicator lights when the radio
receives an FM stereo station.
Note: If the reception is weak, press
MO/ST
once.
4. Tune to the desired station by rotat-
ing
TUN/BAL
.
Note: To improve reception of
strong stations, press
LO/DX
. The
LO indicator lights.
5. Adjust
VOL
,
BAL
, and
TONE
, as
desired.
CASSETTE PLAYER
OPERATION
Warning: To prevent hearing damage,
always turn the volume to its lowest lev-
el before you begin listening to a tape.
12-2117.fm Page 10 Thursday, February 24, 2000 11:21 AM
