18
Remote Message Notification
Touch-Tone Command: 017 = Off
117 = On
Default Setting: Off
The Remote Message Notification (RMN) command sets the
AFX-500 to automatically dial a phone number you have pro-
grammed to notify you when the AFX-500 has received a call.
With Remote Message Notification turned on, the AFX-500
waits about five seconds after an incoming call is complete,
then dials the RMN phone number and sends a series of
beeps for one minute. The beeps tell you whether the incom-
ing call was a voice, fax, or data call.
• one beep — answering machine message
• two beeps — fax and fax/modem call
• three beeps — answering machine, and fax or fax/modem
call
During an RMN call, you can enter your Remote Access Secu-
rity Code (if you have programmed one) and remotely pro-
gram the AFX-500.
Related Commands:
“RMN Conditions”
“RMN Phone Number”
“Remote Access Security Code” on Page 12
RMN Conditions
Touch-Tone Command: 70x
x = 1–3
Default Setting: 1
This command defines the conditions that activate Remote
Message Notification.
• 1 = answering machine message
• 2 = fax and fax/modem message
• 3 = answering machine, fax, and fax/modem message
The AFX-500 is preset to activate Remote Message Notifica-
tion when it receives an answering machine message.
Note: For the AFX-500 to activate RMN, the answering ma-
chine must be connected longer than the value of the Auto-
matic Answering Machine Transfer Timer.
Related Commands:
“Remote Message Notification”
“Automatic Answering Machine Transfer Timer” on Page 13
RMN Phone Number
Touch-Tone Command: 71+ phone number
Default Setting: none
This command sets the phone number that the AFX-500 dials
when Remote Message Notification is activated. The phone
number can be up to 16 digits long.
Related Commands:
“Remote Message Notification”
Caller ID
Touch-Tone Command: 016 = Off
116 = On
Default Setting: Off
This command sets the AFX-500 to use a Caller ID device
when the AFX-500 is set to automatic mode and Rings to An-
swer Call feature is set to two rings. Instead of answering on
the first ring, the AFX-500 passes the first two rings directly to
the
ANSWERING MACHINE
and
PHONE
jacks, giving the Caller
ID device time to record and display the Caller ID information.
In semiautomatic mode, incoming calls are passed directly to
the
ANSWERING MACHINE
and
PHONE
jacks for up to six
rings, so this feature does not need to be turned on.
Related Commands:
“Rings to Answer Call”
Rings to Answer Call
Touch-Tone Command: 40xx
xx = 1–99 rings
Default Setting: 1 ring
This command sets the number of rings the AFX-500 waits be-
fore it answers a call in automatic mode, to enable a Caller ID
device to work with the AFX-500.
If this ring count is set higher than 1 and a call is answered
from an extension phone before the AFX-500 answers, the
single tone transfers and Rotary (Pulse) Dial Transfer are de-
activated. The transfer codes still work, but only if preceded by
#.
Related Commands:
“Caller ID”
“Rotary (Pulse) Dial Transfer” on Page 15
Содержание AFX-500
Страница 23: ...23 NOTES ...
