14
Automatic Ring Reduction Reset
Touch-Tone Command: 03 = Off
13 = On
Default Setting: On
With Automatic Ring Reduction Reset turned on, after Auto-
matic Ring Reduction has reduced the number of rings the
AFX-500 sends to the
ANSWERING MACHINE
and
PHONE
jacks to two, the AFX-500 resets the number of rings to six af-
ter 10 minutes of inactivity on the
FAX
and
FAX/MODEM
jacks.
When Automatic Ring Reduction Reset is turned off and Auto-
matic Ring Reduction has been activated, the AFX-500 sends
two rings to the
ANSWERING MACHINE
and
PHONE
jacks on
every call until you manually reset it by placing a call on any
phone on the same line (or by just picking up the phone then
hanging it up).
Related Commands:
“Rings to Answering Machine and Phone Jacks” on Page 19
“Automatic Ring Reduction” on Page 13
“Automatic Ring Reduction Reset Timer”
Automatic Ring Reduction Reset Timer
Touch-Tone Command: 51xx
xx = 1 to 60 minutes
Default Setting: 10 minutes
This command sets the time the AFX-500 waits for activity on
the
FAX
or
FAX/MODEM
jack before activating Automatic Ring
Reduction Reset.
Related Commands:
“Automatic Ring Reduction” on Page 13
“Automatic Ring Reduction Reset”
Extension Detection
Touch-Tone Command: 04 = Off
14 = On
Default Setting: On
The Extension Detection feature lets you use an extension
phone to answer calls when the AFX-500 is set to automatic
mode. (Semiautomatic mode lets you use extension phones
as part of its normal operation.)
When Extension Detection is turned on and the AFX-500
routes a call to the
ANSWERING MACHINE
and
PHONE
jacks,
you can answer the call using any extension phone. After six
rings, the AFX-500 routes the call to the
FAX
and
FAX/MODEM
jacks, and you can no longer answer the call from an exten-
sion phone.
When Extension Detection is turned off, the AFX-500 only lets
you answer a call using a phone connected to its
ANSWERING
MACHINE
or
PHONE
jacks.
Note: If you have trouble accessing the line from an extension
phone, press . The AFX-500 stops processing the call and
lets the extension phone access the line.
Outbound Voice Exclusion
Touch-Tone Command: 05 = Off
15 = On
Default Setting: On
When Outbound Voice Exclusion is turned on, the AFX-500
prevents its connected devices from using the phone line if an
extension phone is in use. (The connected device receives a
busy signal.)
When Outbound Voice Exclusion is turned off, a call using an
extension phone can be interrupted by any of the phone devic-
es connected to the AFX-500.
Answer Any Jack
Touch-Tone Command: 06 = Off
16 = On
Default Setting: Off
When the Answer Any Jack feature is turned on, you can an-
swer an incoming call using a phone connected to any jack on
the AFX-500. This is handy, for example, if you want to an-
swer a call using your fax machine’s handset or your comput-
er’s phone software. After you answer the call, the AFX-500
listens for a fax alert tone, transfer code or modem tone.
The Answer Any Jack feature operates:
• when a call has been routed to the
ANSWERING MACHINE
and
PHONE
jacks
• after an Automatic No Answer Transfer
• when Distinctive Ring Service Detection is turned on
Содержание AFX-500
Страница 23: ...23 NOTES ...
