background image

25

The TAD plays each recorded memo,
one after the other, beginning with the
most recent one. At the end of each,
the TAD announces the day and time
the memo was recorded. After playing
the last memo, the TAD beeps once.

After you play the memo(s), the
MEMO indicator lights steadily and the
TAD automatically saves the memo(s)
and resets to answer calls. To replay
the memo(s), simply press 

MEMO

again.

DELETING MESSAGES

The TAD lets you delete messages in-
dividually (during playback) or all at
once (before or after playback).

To delete a particular incoming
message, 2-way conversation, or
memo:

• while it plays the first time,

press 

DELETE/PROG

 immediately

after the caller’s message ends
(while the day/time stamp plays)
but before the TAD beeps to start
the next message or function.

• after  playing all messages

once, begin playback again then
press 

DELETE/PROG 

while the

TAD is playing the message you
want to delete.

Playback stops, the TAD beeps twice,
then playback continues with the next
message (if any).

Notes:

• If you press 

DELETE/PROG

 before

the caller’s message ends while
the TAD is playing that message
for the first time, the TAD beeps
once then skips to the beginning
of the next message (if any) with-
out deleting the message.

• If you did not previously set the

day and time, the TAD will not play
a day/time stamp and you cannot
delete a message the first time
you play it.

To delete all incoming messages,
press and hold 

DELETE/PROG

 before

or after playback until the TAD beeps
once. Then press and hold 

PLAY

 until

the TAD beeps twice. The PLAY indi-
cator turns off.

Note: If you delete all messages at
once (before or after playback), this
deletes all messages, even those you
might have skipped.

To delete all 2-way conversations,
press and hold 

DELETE/PROG

 before

or after playback until the TAD beeps
once. Then press and hold 

2-WAY

 until

the TAD beeps twice.

To delete all memos, press and hold

DELETE/PROG

 before or after play-

back until the TAD beeps once. Then
press and hold 

MEMO

 until the TAD

beeps twice. The MEMO indicator
turns off.

43-768.fm  Page 25  Friday, August 13, 1999  2:49 PM

Содержание 43-768





































Отзывы: