19
Checking/Deleting the
Outgoing Announcement
You can press
OGM
at any time to
play the outgoing announcement. Ad-
just
VOLUME
on the side of the TAD to
a comfortable listening level.
To stop listening to the outgoing an-
nouncement before it ends, press
ON/
OFF
.
To delete your recorded outgoing an-
nouncement, press
DELETE/PROG
while it is playing. The TAD beeps
twice and is then set to use its built-in
announcement.
Recording the Memory Full
Announcement
The TAD has a built-in memory full an-
nouncement. When the memory be-
comes full and the TAD can no longer
record messages, the ANSWER,
PLAY and MEMO indicators flash, and
the TAD announces “
Memory is full.”
Follow these steps if you want to
record your own memory full an-
nouncement (up to 1 minute long).
1. Press and hold
4/OGM2
until the
TAD beeps and the ANSWER
indicator flashes.
2. Speak toward the front of the
TAD-1006 in a strong voice from
about 12 inches away.
3. Press
ON/OFF
when you finish
recording the announcement. The
TAD plays the current memory full
announcement.
Note: If you do not press
ON/OFF
,
the TAD automatically stops
recording after 1 minute then
plays the announcement you
recorded.
Checking/Deleting the
Memory Full Announcement
You can press
4/OGM2
at any time to
play the memory full announcement.
Adjust
VOLUME
on the side of the TAD
to a comfortable listening level.
To stop listening to the memory full
announcement before it ends, press
ON/OFF
.
To delete your recorded memory full
announcement, press
DELETE/PROG
while it is playing. The TAD beeps
twice and is then set to use its built-in
announcement.
illustration
illustration
43-768.fm Page 19 Friday, August 13, 1999 2:49 PM
