14
Storing a Number in Memory
Note: It is not unusual to hear beep-
ing/buzzing or the operator’s voice on
the line as you store a number in the
TAD-1006’s memory.
1. Press
STORE
.
2. Enter the number you want to
store (up to 16 digits).
Notes:
• You can store phone numbers
or special banking or telephone
service numbers (such as
access codes or account num-
bers) in memory.
• For security purposes, we rec-
ommend that you do not store
private numbers, such as per-
sonal identification numbers or
passwords, in memory.
• If you have pulse service and
want to use tone dialing, enter
at the appropriate place in
the sequence of numbers.
• To store one or more pauses in
the memory number, see “Stor-
ing a Pause in Memory” on
Page 15.
3. Press
STORE
again.
4. To store the number in a priority
memory location, press a priority
memory dial key (
P1
,
P2
, or
P3
) to
store the number in that location.
To store the number in a standard
memory location, press a number
key (
0
-
9
) to store the number in
that location.
To store additional numbers, repeat
Steps 1-4 for each number you want
to store.
Notes:
• You cannot erase a number in
memory, but you can change it by
storing a new one in its place.
• Write the memory location num-
ber and name associated with that
number on the TAD-1006’s mem-
ory dialing card. (Use pencil in
case you want to change it later.)
To use the card, grasp and gently
pull the tab on the front of the
TAD-1006.
illustration
illustration
43-768.fm Page 14 Friday, August 13, 1999 2:49 PM
