42
Additional Info
Resetting and Registering Handsets
If you are having trouble with a cordless handset or if you want to replace one, you need to clear the
registration information from the base and the handset:
Do you have the base the handset is registered to?
Yes
1.
Press and hold
END
and
#
until the
System Reset
menu appears (about 5 seconds).
2.
Select
Deregister HS.
The display lists all registered handsets.
3.
Select the handset you want to reset.
4.
When the handset asks you to confi rm, select
Yes
. (It may ask you twice, just to be sure.)
The handset clears its information from the base and deletes its own link to the base.
No
1.
Press and hold
END
and
#
until the
System Reset
menu appears (about 5 seconds).
2.
Select
Base Unavailable
.
3.
When the handset asks you to confi rm, select
Yes
. (It may ask you twice, just to be sure.)
The handset deletes its own link without contacting the base.
When you reset a handset (or if you buy a new one), that handset displays a
Handset Not
Registered
message. If you see this message on a handset, you need to register it to a base
before you can use it.
Registering a handset
1.
On the base, open the menu and select
Register Handset
.
2.
On the handset you want to register, press and hold
#
until the handset display says
Handset
Registering
(about 2 seconds).
3.
In about 30 seconds, the handset display should say
Registration Complete
.
Press
TALK ( )/FLASH
and make sure you get a dial tone.
If...
Try...
- you don't hear a dial tone
- the display says
Registration Failed
making sure the handset is fully charged,
and then start over at step 1.
n
Note:
To register a handset to a different base, see the section “Expanding Your Phone” in the
user’s guide for the other base.
