Radio Shack 32-2054 Скачать руководство пользователя страница 8

14

15

8

Ÿ

, 2.5W Speaker

8

Ÿ

, 5W Speaker

16

Ÿ

, 1.25W Speaker

Output Side

Input Side

Output Side

Input Side

Output Side

Input Side

A

A

A

A

Amplifier

Transformer

Transformer

Transformer

Troubleshooting

Problem

Cause

Solution

No power

Sound sources or speakers 
are not properly connected.

Check all connections.

No sound

The

MASTER VOLUME, 

MIC 1, MIC 2, PHONO/AUX, 
100 Hz, 1 kHz, 8 kHz

 controls 

are set to minimum.

Adjust the volume controls to 
desired settings.

Sound sources or speakers 
are not properly connected.

Check all connections.

A microphone or cable might 
be faulty or loose.

Check all microphones and 
cables.

The speaker’s wires might be 
of the wrong impedance.

Make sure all speakers 
connected have the same 
impedance rating.

The speaker’s wires might be 
too small.

Make sure the speaker’s 
wires are the correct gauge 
according to their lengths.

The amplifier might have shut 
down.

Turn off the amplifier and let 
it cool down. Make sure the 
amplifier is properly ventilated, 
and then turn it back on.

Feedback

Microphones or speakers are 
too close together.

Reposition the microphones 
and speakers.

Connections

Troubleshooting

Содержание 32-2054












Отзывы: