Radio Shack 32-2054 Скачать руководство пользователя страница 10

18

19

17. An outside antenna system should not be located in the vicinity of overhead power 

lines or other electric light or power circuits, or where it can fall into such power 
lines or circuits. When installing an outside antenna system, extreme care should 
be taken to keep from touching such power lines or circuits as contact with them 
might be fatal.

18. Do not overload wall outlets, extension cords, or integral convenience receptacles 

as this can result in a risk of fire or electric shock.

19. Never push objects of any kind into this product through openings as they may 

touch dangerous voltage points or short-out parts that could result in a fire or 
electric shock. Never spill liquid of any kind on the product.

20. Do not attempt to service this product yourself as opening or removing covers may 

expose you to dangerous voltage or other hazards. Refer all servicing to qualified 
service personnel.

21. Unplug this product from the wall outlet and refer servicing to qualified service 

personnel under the following conditions:

a)

When the power-supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen into the product.
c)

If the product has been exposed to rain or water.

d) If the product does not operate normally by following the operating 

instructions. Adjust only those controls that are covered by the operating 
instructions as an improper adjustment of other controls may result in damage 
and will often require extensive work by a qualified technician to restore the 
product to its normal operation.

e) If the product has been dropped or damaged in any way.
f)

When the product exhibits a distinct change in performance – this indicates a 
need for service.

22.

Replacement Parts:

 When replacement parts are required, be sure the service 

technician has used replacement parts specified by the manufacturer or have the 
same characteristics as the original part. Unauthorized substitutions may result in 
fire, electric shock, or other hazards.

23. Upon completion of any service or repairs to this product, ask the service 

technician to perform safety checks to determine that the product is in proper 
operating condition.

24. Do not install near any heat sources such as radiators, heat registers, stoves, or 

other apparatus (including amplifiers) that produce heat.

WARNING: 

4OREDUCETHERISKOFÞREORSHOCKHAZARDDONOT

expose this product to rain or moisture.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

4OREDUCETHERISKOFELECTRICSHOCKDONOTREMOVE

cover or back. No user-serviceable parts inside. Refer servicing

TOQUALIÞEDPERSONNEL

This symbol is intended to alert you to the presence of un-

insulated dangerous voltage within the product’s enclosure that

MIGHTBEOFSUFÞCIENTMAGNITUDETOCONSTITUTEARISKOFELECTRIC

shock. Do not open the product’s case.

This symbol is intended to inform you that important

operating and maintenance instructions are included in the

literature accompanying this product.

CAUTION

Do More with your Amplifier

Headphones

• Avoid disturbing others
• Easily check and adjust balance 

of sound sources

Line Transformer

• Connect speakers with different 

impedances

• Freely add or remove a speaker 

from the PA system

• Reduce signal loss

7.5-Watt Amplified Speaker

• Amplify over loud noises

Ceiling Speaker

• Easy to install
• Useful for large audience occasions

Dynamic Microphone

• Ideal for high noise 

background

Speaker Wire

• Provide less loss and 

lower attenuation

Wire Connector

• Secure wire strands

Safety

Do Stuff

Содержание 32-2054












Отзывы: