6
7
Rear View
Terminals (COM, 4
, 8
,
16
, 70V)
Connect speaker wires to
the selected terminals.
AC IN
Connect to a
standard AC outlet
using the supplied
AC power cord.
DC 12V IN Jack
Power the
amplifier from a
5A, 12V vehicle
battery source.
GND
Connect a ground wire
(black or green) to avoid
low-frequency hum.
PHONO AUX/CD Switch
Select turntable or other
audio input source.
MIX BUS Jack
Connect an extra
amplifier for
multiple audio
sources.
AUX/CD Input Jacks
Connect a variety of audio
input sources for music and
special effects.
L/R PHONO Jacks
Connect a turntable.
AC OUTLET (UNSWITCHED)
Supply power (maximum load of
100W) to a musical instrument or
another amplifier.
A Look at Your Amplifier
Front View
POWER
Turn the amplifier
on or off.
Power Indicator
Lights when the amplifier
is turned on.
PHONES Jack
Connect
headphones
to hear mixed
audio in privacy.
MIC 1 and MIC 2
Input Jacks
Connect up to two
dynamic microphones.
MIC 1 and MIC 2
Volume Controls
Adjust the levels of
the microphones
separately.
PHONO/AUX Volume Control
Adjust the volume of the turntable
or auxiliary sound source.
TONE CONTROL (100Hz, 1kHz, 8kHz)
Enhance the sound or tailor the high,
medium, and low frequencies for each
audio source input to the acoustics of a
particular performance environment.
MASTER VOLUME
Adjust the overall
sound level.
LEVEL Indicator (in dB)
Monitors and controls
the output power level.
A Look at Your Amplifier
A Look at Your Amplifier