Radio Shack 32-1218, Руководство пользователя

Страница: 2 / 12

2
Features
ˆ
Features
Your RadioShack 4-Channel Stereo Mixer is
a sophisticated desktop control center, per-
fect for mixing sound on four separate chan-
nels from multiple audio sources such as
cassette decks, tuners, CD players, turnta-
bles, or the audio outputs from VCRs or cam-
corders. The mixer is ruggedly constructed
for home or professional use. You can adjust
each audio source's sound level so you can
get the best mix for playing through your
sound system or for recording. Its features
include:
Stereo Phono Input Jacks — for connect-
ing low-level audio sources, such as turnta-
bles with a magnetic cartridge.
Stereo Line Output Jacks — let you con-
nect the mixer's output to your amplifier/re-
ceiver and tape deck so you can play the
sounds from your input sources through your
speaker system, and record them.
Stereo Line Input Jacks — let you connect
most high-level audio sources such as a CD
player, tape deck, tuner, camcorder or VCR.
DJ Microphone Input (MIC 1) Jack — lets
you connect a microphone (not supplied)
with a
1
/
4
-inch (6.35mm) plug.
Auxiliary Microphone Input (MIC 2) Jack
— lets you connect a low impedance micro-
phone (not supplied) with a
1
/
4
-inch
(6.35mm) plug.
CROSS FADER Control — lets you smooth-
ly switch between two input sources such as
a turntable and a tape deck.
Output Level Light Emitting Diode (LED)
Meters — indicates the mixer's total output
signal level.
CUE LEVEL Control — lets you adjust the
headphone's volume level.
MASTER Volume Control — lets you con-
trol the mixer's overall volume level.
BASS/TREBLE Controls — lets you boost
or attenuate bass and treble, for the desired
sound.
BALANCE Control — lets you adjust the
sound balance between the left and right am-
plifier output.
MIC 1, CHANNEL 1, CHANNEL 2, CHAN-
NEL 3, CHANNEL 4 Slide Volume Con-
trols — for fingertip control of sound mixing
and fading.
MIC 2 LEVEL Control — lets you adjust the
microphone's volume.
PHONO 1/LINE1, PHONO 2/LINE 2 Input
Source Selectors — let you easily choose
the desired audio input source for mixing
(
CHANNEL 1
and
CHANNEL 2
).
MONO/STEREO Selector — lets you set the
output to amplifier for stereo or mono.
ASSIGN A/B Input Source Selector — lets
you select the input sources to be mixed by
cross fading.
CUE Audio Source Selector — let you se-
lect the channel for the desired audio input
source, so you can monitor and prepare the
channel before mixing the source.
PHONES Jack — lets you connect a pair of
stereo headphones (not supplied) with a
1
/
4
-
inch plug.
©
2001 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.