Radio Shack 32-1218, Руководство пользователя

Страница: 3 / 12

3
Preparation
ˆ
Preparation
PRESETTING THE
CONTROLS
Warning: A sudden high output from the
mixer could damage your hearing, especially
if you use headphones, and might also dam-
age the audio devices connected to the mix-
er's output. Before using the mixer, make
sure you set your receiver/amplifier's volume
control to its lowest volume setting.
Before you connect the AC power source,
make sure you set
POWER OFF/ON
to
OFF
.
To avoid sudden and unusable sound out-
puts from any audio devices that you con-
nect to the mixer, be sure to have their power
controls set to off, and any tone controls set
to flat (zero).
CONNECTING THE
OUTPUTS
To play the mixer's output signal through
your sound system, connect one end of an
audio cord (not supplied) to the mixer's
AMP
L
(white) and
R
(red)
OUTPUT
jacks, then
connect the other end to your amplifier/re-
ceiver's left and right line input jacks. Match
left to left, and right to right.
To record the mixer's output signal, connect
one end of an audio cord (not supplied) to
the mixer's
REC L
(white) and
R
(red)
OUT-
PUT
jacks, then connect the other end to
your tape deck's left and right line input jacks
(matching left to left, and right to right).
CONNECTING THE INPUTS
You can connect up to four line-level and up
to two low-level audio input sources to the in-
put jacks on the back of the mixer. You can
connect one microphone to the mixer's front
and another microphone to the back panel.
1. Connect the line-level outputs from up to
four audio sources (such as a CD
player, tape deck, tuner, camcorder, or
VCR) to the
LINE 1
,
LINE 2
,
AUX 1
and
AUX 2 L
and
R INPUT
jacks (matching
left to left, and right to right).
Caution: Do not connect an audio source
with a line-level output to the low level
PHONO 1
or
PHONO 2 L
and
R INPUT
jacks.
Doing so could damage the mixer.
2. Connect the low-level outputs from up to
two audio sources (such as magnetic-
cartridge turntables) to the
PHONO 1
and
WARNING:
To reduce the risk of fire or
shock hazard, do not expose this product to rain
or moisture.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
This symbol is intended to alert
you to the presence of uninsu-
lated dangerous voltage within
the product’s enclosure that might
be of sufficient magnitude to con-
stitute a risk of electric shock. Do
not open the product’s case.
This symbol is intended to inform
you that important operating and
maintenance instructions are
included in the literature accom-
panying this product.
!
!