7
Se
tu
p
Special Panel Markings
The maximum voltage that this meter can measure is 600V RMS AC or 600V
DC. To avoid electric shock and damage to the meter, do not connect the
two input terminals (
-COM
and
+V
.
Ω
.
mA
) to any source that exceeds 600
volts with respect to ground.
400mA
MAX
The maximum current that this meter can measure at this jack is 400mA DC or
AC.
Caution
:
RISK OF ELECTRIC SHOCK! Refer to the complete operating
instructions.
Caution
:
Be extremely careful when taking high-voltage measurements. DO
NOT TOUCH TERMINALS OR TEST LEAD ENDS.
CAT II
This equipment is rated for installation category II (3600 VA max.).
10A MAX.
UNFUSED
The maximum current you can measure at this jack is 10 amps DC/AC. This
jack is not fuse-protected.
The meter is protected by double insulation.
n
Note:
The UL mark does not indicate that this product has been evaluated by
Underwriters Laboratories for the accuracy of its readings.
600V
MAX
