5
3.
Connect the supplied AC adapter to the
DC 12V
jack, then plug it into a standard household outlet.
4.
Adjust the flip-up antenna so that
the dotted side
faces the receiver.
2
Install the Receiver
1.
Make sure the receiver is off, then connect the
receiver to your TV with the RCA cable.
2.
Connect the supplied AC adapter to the
DC 12V
jack, then plug it into a standard household outlet.
3.
Adjust the antenna so that
the dotted side
faces the
transmitter.
n
Notes
:
• S-Video and Composite Video are interchangeable,
but S-Video is usually the dominant input. There will
no picture output at the receiver, if your A/V device
only has composite video and you connect S-Video
cable to the transmitter.
• If you use the S-Video connection on the transmitter,
you must also use the S-Video connection on the
receiver.
•
Make sure the receiver is set a little forward to the top
of TV in order to have the best IR performance.
•
Turn the dotted side of the transmitter and receiver
face to face to obtain the best performance.
15-332 -EN 033110.indd 5
4/6/2010 5:25:09 PM
