Radio Shack 15-100, Руководство пользователя

Страница: 20 / 74

20
PROGRAMMING FAVORITE CHANNEL SCAN
The remote allows you to store a list of up to 10 favorite
channels, in any order, that are immediately scanned
when you press
FAV
(
SCAN
).
NOTE:
You can only store channels from one device
for Favorite Channel Scan.
1. Press and hold P until the LCD displays
Code Set OK or
.
2. Use the use the or keys to scroll
through the LCD display until
Fav Ch
is
displayed. Press OK .
3. The LCD displays
Select Mode or
.
4. Select the mode you want to program for Favorite
Channel Scan (for example,
TV ).
5. The LCD displays
1st Fav OK or
. Press OK .
6. The LCD displays
Enter Chan OK or
. Enter a
channel number (for example, 039 ). Press OK .
NOTE:
If you press after programming your first
Favorite Channel, the remote saves the last
Favorite Channel selection and exits back to
the main Favorite Channel screen.
7. The LCD displays
2
nd
Fav CH OK or
. Press OK .
Enter the next channel number (for example,
055
).
Press OK .
8. Continue entering channel numbers until you get
up to 10 channels programmed.
9. As soon as you enter the 10th channel, the LCD
displays
Success
and exits (if you decide you
need fewer than 10 channels, then press
EXIT
or
).
NOTE: Whenever you want to add or replace one or
more favorite channels, all previously entered
favorite channels are cleared.
USING CHANNEL SCAN
Use FAV ( SCAN ) to start a three-second scan of all
favorite channels (if programmed; see “Programming
Favorite Channel Scan” on page 20) or all channels (if
Favorite Channel Scan is not programmed).
1.
Press a device key.
2. Press SCAN once.
3. To stop scanning channels at any time, press any
key once.
SETTING THE POWER MACRO
You can use your new RadioShack 8-in-1 LCD Remote
to program a power macro that turns your devices off or
on in the sequence you choose.
RadioShack 8-in-1 LCD ENG.fm Page 20 Friday, February 9, 2007 6:11 PM