(6) DSC /menu
Use this key to enter Menu Setup or DSC Call Menu
Call Mode is used for making DSC Calls. Menu Mode is
used to setup the radio.
(7)
Hi/Low/mem
Press and release HI/LO button to toggle between
power output 25watt and output 1 watt.
“HI” or “LO” icon appears on LCD display to indicate
setting
Hold the key select memory channel mode
(8)
Scan
Start and stop normal or priority scan and MEM
channels and priority channels scan.
(9) Watch
Start dual watch or tri-watch, Stop dual watch or tri-
watch.
(10) 16
Press 16 key to quit all other modes and to into the
priority channel.
(11) DISTRESS
this button is used to send a signal of distress in case of
emergency. See DSC Operation for details of sending
the call. This button is covered by a spring top.
The Distress Function or any other transmitted DSC
function do not work unless a user’s MMSI has been
entered.
.
(12) LCD:
Large LCD (2“×1.5”) with viewable area of 4×12 dot
matrix makes it easy to be read.
(13) Built-in Speaker
Guarantee a clear ring and voice communication
2.2
BASE STATION (REAR)
①
Antenna Jack:
Connect a suitable antenna to your marine VHF
radio to get a satisfying communication.
②
Power Source
Connect the radio to a 13.8 VDC power source.
③
External Speaker Connection Cable
If need be, you can also use this cable to connect
an external speaker.
④
GPS Connector
Connect the radio to a GPS receiver to acquire
the position and time information of your vessel
Page 7
Page 8
