Radio Ocean RO4700, Руководство пользователя

Страница: 19 / 22

6.8 DSC
SETUP
The submenu is used to set up the DSC/ATIS function.
The following 5 items are available for selection.
USER MMSI
GROUP MMSI
INDIV REPLY
DSC ENABLED
POS REPLY
6.8.1 ENTER YOUR USER MMSI
This is a once-only operation.
You must enter your user MMSI first then you can access the DSC
functions.
1 Select DSC SETUP then USER MMSI and press the CH knob. If an
existing MMSI is stored, the values appear.
2 If the MMSI is blank, a dashed line appears. Enter user MMSI
along the dashed line. Press the
CH knob to confirm each correct
entry to move to the next digit.
If your make an error, rotate the CH knob < appears, then press
the CH knob to backup and correct the entry.
3 Hold
the CH knob to store your user MMSI.
4 Enter your user MMSI again as a password check, hold the CH knob to
permanently store the your user MMSI and return to the menu.
5 You can view your stored user MMSI at anytime by selecting user MMSI
in the main menu.
6 If there is no USER MMSI stored and the radio’s DSC function is
attempted, the radio says “DSC IS NOT OPERATIONAL.” & “PLEASE
ENTER MMSI” as below.
DSC WARNING MESSAGE
6.8.2 MAINTAIN GROUPS
You can program up to three group MMSI numbers and associated Group
names, group MMSI numbers always begin with a zero (0). You only enter the
last 8digits of the group ID number, the intial”0” is automatically entered.
6.8.2.1 ENTER YOUR GROUPS
1 Select GROUP MMSI and press the CH knob. If existing names &
MMSI data are stored, the values appear.
If blank, the dash appears on LCD
2 The entry procedures are the same as those explained in the BUDDY
LIST.
6.8.2.2 EDIT USER GROUPS
1 Select DSC SETUP then GROUP MMSI and press the CH knob. The
existing names & MMSI data are displayed on screen. Select the Buddy
name or, only the MMSI that you want.
2 Press the CH knob to edit. The entry procedures are same as that of the
BUDDY LIST
3 when the edition is finish press the CH knob to store the changes and
return to the GROUP MMSI screen.
6.8.2.3 DELETE
A GROUP
1 Select GROUP MMSI and press the CH knob. The existing group
names are displayed on screen
2 Select what you want to delete and press the CH knob will display
EDIT or DELETE item
DSC IS NOT
OPERATIONAL
PLEASE ENTER
MMSI
USER GROUP
>EILEEN
CHANG
FRIENDS EDIT NAME:
>EILEEN
MMSI:
ID053421608 EILEEN
>EDIT
DELETE
DSC SETUP
USER MMSI
>GROUP MMSI
INDIV REPLY USER GROUP
> - - - - - - - -
- - - - - - - - -
- - - - - - - - GROUP NAME
> - - - - - - - - - -
GROUP MMSI
IDO - - - - - - - - -
INPIT MMSI
NUMBER
>- - - - - - - -
HOLD ENTER
USER MMSI
INPUT AGAIN
>- - - - - - - -
HOLD ENTER
USER MMSI
ID 500000001
>SAVE
CANCEL
Page 37 Page 38