2.
Press the
CH
knob again to access manual enter ID screen, enter the MMSI
number, when MMSI entry is completed, press the
CH
knob to accept the
selection
3.
Then rotate the
CH
knob to select the working channel and press the
CH
knob to accept select.
(Only in the case of a call to a ship, it is permitted to enter a talk channel; a call
to a coast station, the coast station will specify the channel to talk on in its
acknowledgement.)
4.
the radio summarizes the call details and asks for confirmation to send the
call (send?).
5. Press the
CH
knob again to send the call.
Once the call is sent, the Text
area of the display momentarily shows the Calling message.
, then display a
awaiting acknowledgment.
6
If
the call is acknowledged, press PTT to talk
7
If the call does not get with in 16 seconds, the radio prompts you to
resend the call.
5.2.4.2 Sending an Individual Call (MMSI stored in Buddy list)
1.
Press
DSC
/MENU to DSC mode, then select “NEW CALL”. Press the
CH
knob, the arrow is pointing to
<MANUAL>
2. Rotate
the
CH
knob select the person of the Buddy list that you want to call.
The operation procedures are the same as the manual explains in "sent an
individual call".
5.2.4.3 ACKNOWLEDGEMENT OF AN INDIVIDUAL INCOMING CALL
1.
If INDIV REPLY switches to MANUAL the radio requires the operator to
manually send an acknowledgement to the requesting radio. Press
CH
key
to send an acknowledgement or CANCEL key to cancel.
2.
If INDIV REPLY switches to AUTOMATIC the radio will automatically send
an acknowledgement to the requesting radio within 10 seconds of receiving
the call.
5.2.5
LAST CALL (RECALL THE MOST RECENT INCOMING CALL)
This facility also is useful and is used frequently as routing individual call
1.
Press the DSC / Menu key to enter the DSC mode LAST CALL will be
pointed, press
CH
key to display the detail information of the last call
2.
Select the working channel for individual call and press
CH
key, The radio
summarizes the call details and ask for confirmation to send the call
3.
press
CH
knob to send the call
450078964
IND ROUTINE
>SEND
CANCEL
450078964
IND ROUTINE
>SELECT CH
PRESS ENTER
450078964
INDIVIDUAL
ROUTINE
AWAITING ACK
5.2.6
SEND an INDIVIDUAL CALL USING THE CALL LOG
The CALL LOG contains the contact details for the 20 most recent
incoming calls, so you call any of them again quickly
1.
Press the DSC / Menu key to enter the DSC mode, select CALL LOG,
Press up/down key to scroll for previous call.
2. Press
the
CH
key to confirm the choice then follow the as the ways to make
the call in section 5.2.4
(To save this log enter your BUDDY LIST, select SAVE, then press ENT
and enter a name the logged MMSI is automatically displayed.)
RETRANSMIT
IND ROUTINE
>SEND
CANCEL
DISTRESS
21’22.0012N
120
º
40.1001E
10:15 UTC
5. 2.7
POS REQUEST AND POS REPLY
5. 2.7.1 POS REQUEST (REQUEST THE LL POSITION OF A BUDDY)
The option enables you to request GPS position information from any
vessel for which an MMSI number is known.
1
Select the POS REQUEST on the DSC Menu, press the CH
key to enter the BUDDY list (<MANUAL> AND BUDDY list)
select the one for position information.
2
The Call will be initiate and same as individual call procedures.
5.2.7.2 POS
REPLY
The position relay can send your position to another radio with
this feature. Your radio must have an operating GPS receiver
connected to be used to send the position.
Page 25
Page 26
