Digital BUS-WATCH
®
SD40
Page 56 of 72
Radio Engineering Industries, Inc.
640434 -- Rev 0 -- 9/30/2011
CURRENT VALUE X/Y/Z: Current acceleration readings from the
accelerometer.
CALIBRATE: Accelerometer must be calibrated after installation.
Highlight Calibrate and press enter to calibrate accelerometer.
Figure 45: Temperature Threshold
The Temperature setup page allows user to enable high/low temperature alarm.
HIGH/LOW TEMP ALARM: When set to on, the DVR will record an
alarm event when temperature sensor readout is higher than threshold.
HIGH/LOW TEMP THRESHOLD: The highest/lowest temperature
before triggering an alarm event.
SPEED: The speed setup page allows the user to set speed source,
calibrate speed sensor, and set speed limit.
