RB8762CJF Designer’s Guide (RRD2Z50‐20190314001‐A09‐C2)
15
Operating RB8762C MB
Introduction:
Radicom provides RB8762CMB Development Kit as a quick platform for testing and evaluating the
RB8762CHM Bluetooth module. Each RB8762CMB has an UART and USB connector interface.
You may choose either UART or USB interface for data transmission.
If you use
UART
interface to transmit your data, please plug one null cable to COM port and insert a
4 pieces jumper into J17 (as below). Also remember to connect USB connector for power supply. As
long as connecting RB8762CMB with UART interface, you’re able to check information of
RB8762CMB, including role (master/slave), FW version, device name and BD address.
If you use
USB
interface to transmit your data, please plug one USB cable to USB connector and
insert a 4piece jumper into J13 (as below). This USB connector can work as power supply and data
transmission at the same time. With USB interface, you may use
AT-command
(at-i) to check
information of RM8762MB.
After above connection, you can issue AT commands to instruct the modules to establish a Bluetooth
connection to transmit and receive data through this USB-UART interface.
※
The actual data transportation is USB to UART Bridge Virtual COM Port for this usage.
Please download CP2102 USB driver from below link:
http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx
