38
R1K 34 - RAD - ING - Man.Inst. - 1901.1_firm.L224C_AHS
2 T
abella par
ametri_MIAH4_firm.L224C_EN
2. FIRST START-UP
SUPPOR
T
C
ENTRE
PARAMETER
DESCRIPTION
RANGE
FUNCTION
P13
HEATING FAN MAXIMUM SPEED ADJUSTMENT
THROUGH THIS PARAMETER YOU CAN SET THE FAN MAXIMUM SPEED IN
HEATING PHASE, THAT CORRESPONDS TO THE MAXIMUM BURNER POWER
DURING A REQUEST TO OPERATE IN HEATING MODE [SEE CHAPTER ‘HEAT
CAPACITY DIAGRAM (KW) –ELECTRIC FAN FREQUENCY (HZ)’].
THE VALUE IS PRE-SET BASED ON THE SET POWER (SEE PARAMETER P00)
AND ON THE GAS TYPE (SEE PARAMETER P02)
VALUE
SET FOR
PARAMETER
P12 - 203
THE VALUE IS EXPRESSED
IN HERTZ
(1HZ = 30 RPM)
P14
STARTING STEP ADJUSTMENT
THROUGH THIS PARAMETER YOU CAN SET THE FAN SPEED DURING
START-UP
THE VALUE IS PRE-SET BASED ON THE SET POWER (SEE PARAMETER P00)
AND ON THE GAS TYPE (SEE PARAMETER P02)
VALUE
SET FOR
PARAMETER
P10 - 203
THE VALUE IS EXPRESSED
IN HERTZ
(1HZ = 30 RPM)
P15
ANTI-LEGIONELLA FUNCTION
(FOR STORAGE BOILERS ONLY)
THROUGH THIS PARAMETER YOU CAN ACTIVATE/DEACTIVATE THE
“ANTILEGIONELLA” HEAT TREATMENT OF THE STORAGE TANK. EVERY 7
DAYS THE WATER TEMPERATURE INSIDE THE STORAGE IS HEATED BEYOND
60 °C THUS GENERATING A BURNING HAZARD. KEEP UNDER CONTROL
SUCH DOMESTICH HOT WATER TREATMENT (AND INFORM THE USERS) TO
AVOID UNFORSEEABLE DAMAGES TO PERSONS, ANIMALS AND PROPERTY.
A THERMOSTATIC VALVE SHOULD BE INSTALLED AT THE DOMESTIC HOT
WATER OUTLET TO AVOID ANY BURNS.
0 - 1
0 = DISABLED
1 = ENABLED (PRE-SET
BY DEFAULT ON STORAGE
BOILERS ONLY)
