26
INGROUND: WALK-IN STEP INSTALLATION
Prepare and Position Step
Install leg supports for the steps. For steps supplied by Radiant Pools, instruction will be provided.
If steps are purchased separately through another provider, verify compatibility by talking with
a Radiant Pools representative. Be sure to check step manufacturer’s instructions as the step
supports will vary by manufacturer.
Position the step in the desired location. Level step, establish benchmark.
The benchmark (finished height of the pool) includes the wall height, the
coping and the decking (concrete, pavers, etc). Adjust height of step by
aligning top of coping with top of step and plumb by checking front face
of step unit with adjoining panel. See images below to determine the
proper benchmark for your installation.
Once step is positioned, check levels from side to side and front to back.
Trimline Step with Standard Coping
Trimline Step with CP2 Coping
Cantilever Step with Paver Coping
Trimline Step with Premium Coping
Top of Panel
Top of Step Flange
CP2 Coping
Foam
Block
Trimline Collar
Step
Faceplate
Step
Flange
Step
Wall Panel
Top of Panel
Top of Step Flange
Standard 2" Coping
Foam
Block
Trimline Collar
Step
Faceplate
Step
Flange
Step
Wall Panel
Top of Panel
Top of Step Flange
Premium 4" Coping
Foam
Block
Trimline Collar
Step
Faceplate
Step
Flange
Step
Wall Panel
Top of Panel
Step
Flange
Horizontal Mount
(Paver) Coping
Step
Wall Panel
Step
Faceplate
A
.
