- 3 -
GENERAL DESCRIPTION
The Radiant Communications
Series DL221/DL221A
transceivers
are used to connect two active ethernet network components
together over a fiber optic cable. Radiants unique technology
allows the same transceiver to be used for connecting 10BaseT or
100BaseT components together. The Radiant Communications
Series DL221/DL221A
transceivers allow for extended fiber trans-
mission distances -- in many cases greater than 100 KM. In addi-
tion, the Series DL221A transceivers allow for bi-directional, full
duplex transmission between ethernet components over a single
optical fiber.
It is convenient to think of the
Series DL221/DL221A
transceivers
as having two sections -- an electrical section, which interfaces to
the ethernet component; and an optical section, which interfaces to
the fiber optic cable.
SPECIFICATIONS
Standard Compliance:
IEEE802.3u, 100BaseTx, 100BaseFx,
10BaseT
100BaseTx Port
RJ-45 connector
Half/full duplex support via auto-negotiation or manual
100m over UTP/STP 100 ohm cat.5 cable
Auto-polarity correction
MDI-II/MDI-X selection
10BaseT (switch selected)
100BaseFx Port
1300nm SC connectors. Optional Single Fiber (DL221A)
Distance: > 100 km (DL221/SMSP)
Full/half duplex switch selected
Diagnostics
Per Channel
Full duplex, Link, Activity - 100BaseFx side
Per System
Power (dual, if redundant PS present)
Controls
Fiber side: FDX/HDX
Copper side: 10/100 Mbps, FDX/HDX, Autosensing disable/
enable
Environmental/Physical
Power supply:
100/240 VAC.50/60 Hz
Power consumption:
5 W max.
Operating temperature:
0-45
O
C (32-113
O
F)
Storage temperature:
-30O-65)C (22O - 149OF)
Humidity:
10-90% non-condensing
NOTE:
Specifications subject to change without prior notice.