4.2.2.5
ECG Analysis
Once AED pads are clearly attached to the patient’s chest, AED starts
ECG analysis for patient
4.2.2.6
Electric shock and CPR
Once ECG analysis is completed, the AED operates as shown below
When Electric Shock is needed (Defibrillation is required)
①
Audio guidance:
‘
Electric shocks are needed”
,
“Charging”
②
After a while, once recharging is completed, shock button blinks
③
Audio guidance: “Press the flashing orange shock button”
④
Audio guidance: “Stay away from the patient”
⑤
Press the flashing orange shock button
⑥
Electric shock is delivered to the patient, “Electric shock has
been delivered”
⑦
After electric shock, perform CPR procedure following audio
guidance
⑧
Audio guidance: “Start CPR”
⑨
Audio guidance: “Compress the chest 30 times”
⑩
Beeper: rings 30 times
⑪
Audio guidance: “Start mouth to mouth CPR 2 times”
* (There is no audio guidance in the non-expert mode in HR-503B Type)
⑫
CPR guidance for
○
6
~
○
9
will repeat every 30 seconds and
operates as shown below after repeat of 5 cycles
During ECG analysis, stay away from patient
For accurate and safe ECG analysis, do not physically contact the
patient during ECG analysis
