The AutoCity driving mode allows the setting of minimum alert detection speed for signal suppression
and signal filtering resulting in significantly reduced false alerts. Select AutoCity in Setting Mode.
Setting AutoCity speed: (feature selectable only if Setting Mode is set to AutoCity): Tapping the Middle
button lets you select the speed for editing
To change the sensitivity of signal reception use
+ / -
button on the side of the unit. The level of signal
suppression can be selected in the range 0-9. The displayed numbers indicate the sensitivity reduction
in the different radar bands. The example displayed above indicates that the X Band sensitivity is
reduced by 50%, K Band sensitivity reduced by 20% and Ka Band sensitivity is not reduced at all (0%
reduction).
Left speed setting indicates the speed below which the radar reception of the detector will be complete-
ly disabled (in example above 20 mph). No signals from police radar or false signals from automatic door
openers will be reported.
The right speed setting indicates the speed below which the detector will detect alerts in City mode
with reduced radar sensitivity (in example above 40 mph).
+ / -
buttons on the right side of the detector will change the specific speed setting.
RECOMMENDATION “20” and “35”: The detector will not alert to any signal below 20 mph and will
operate with reduced radar reception between 20 and 35 mph. Maximum detector sensitivity will be
achieved above 35 mph.
Setting City and AutoCity sensitivity (this option is available only in City or AutoCity Mode): By means of
the
Middle button
you can select the radar band for editing.
