38
EN
3.4 Glossary - definition
Blockage detection / obstacle detection
Tubular motor safety features.
In the event of a blockage or if an obstacle is en-
countered, the tubular motor stops and automati-
cally travels briefly in the opposite direction.
DIN EN 13659
"Shutters and external Venetian blinds - Performance
requirements including safety."
This standard determines the performance require-
ments that externally attached shutters and blinds
must fulfil. It also contains significant hazards with
regard to the design, transportation, installation,
operation and maintenance of these shutters and
blinds.
DIN VDE 0100, Part 701 and 702
“Erection of low voltage installations -
Part 7-701 and 7-702“
This standard defines the requirements for special
installations or locations, rooms with a bath or
shower / basin etc.
Torque monitoring
The torque monitoring protects the screen and the
complete system from being destroyed and people
from being injured. It is also used to find the end
points, amongst other things.
DuoFern
RADEMACHER radio technology for controlling
compatible products.
End points
An end point is defined and set for each direction
of travel of the screen. Once this point has been
reached, the tubular motor switches off and the
screen stops.
HomePilot®
The HomePilot® is a central control unit for
RADEMACHER radio products.
Transient operation (KB)
Tubular motors are not designed for continuous
operation. Transient operation defines the maxi-
mum permissible running time.
Magnetic ring
The magnetic ring
is located in the area of the
drive head
. It is driven by the winding shaft
(12)
and the adapter
and is used to find the end
points, and monitor/control the shaft rotations in
normal mode.
Configuration of KNX/EIB actuators for
RADEMACHER tubular motors
◆
KNX/EIB actuators are used to control electrically
operated roller shutters, awnings etc.
◆
Some parameters must be set prior to commis-
sioning in order to ensure trouble-free operation.
Universal setting cable
RADEMACHER accessory for the specialist com-
pany to set the end points.
Type
4090-1
Item no. 9600 00 86
i
