56
1
2
4
5
3
EN
9.6 Connect the door drive housing to the rail
1.
First of all insert the connector (5).
2.
Place the rail (4) with the inboard chain sprocket
(supplied pre-mounted into the rail) over the
connector (5).
3.
Place the two fixing brackets (2) over the rail (4)
and screw these firmly onto the drive housing
with the enclosed self-tapping hexagon screws
(6 x 15 mm).
Legend
1
= Self-tapping hexagon screws (6 x 15 mm)
2
= Fixing brackets
3
= Microswitch
4
= Rail
5
= Connector
IMPORTANT
Ensure that the microswitch
(3)
is not damaged when
mounting the rail.
NOTE!
Alternatively you can install the drive transversely to the
rail, e. g. if space is tight (see following page).
