RADEMACHER DuoFern, Инструкция по эксплуатации

Страница: 98 / 120

98
EN
i
End point setting
3.
Open the “ End point setting ” menu.
4.
Move the roller shutter to the desired
position with the up / down buttons.
The end position is stored in the tubular motor
after releasing the up / down button.
4.1
If the desired end position is not
correct, the roller shutter can be moved
again in the opposite direction by pressing
the up / down button in order to repeat
the setting.
The tubular motor moves for approx. 5 sec-
onds and then stops automatically.
4.2
Reset the desired end position
with the up / down buttons.
15.9 End points