58
EN
16.4 Automatic solar function; brief description
The automatic solar function enables brightness-
dependent control of the roller shutters in combination
with the light sensor. To do this, the light sensor is
secured to the window pane with a sucker and then
plugged into the RolloTron Comfort DuoFern device.
or
A
central sun shading controller
is used to transmit the
required signals to the RolloTron Comfort DuoFern as
well as to the other devices on the DuoFern network.
Automatic solar function
Automatic moving up and down of the roller shutter once
a set limit is exceeded. The roller shutter end position can
be freely selected by changing the position of the light
sensor on the window pane or by setting the sunshine
position.
Example installation
Light sensor, see page 86 (accessories)
Please note the state of the sun icon on the standard
display.
On
The automatic solar function is switched on.
Flashing
During the activated automated solar function, the corre-
sponding icon flashes in the standard display as soon as
sunlight is detected.
