10
1143923-W2-E
VALVE COMBINATIONS
These thermostatic mixers are available with various shower fittings and water saving features, refer to
the table below to identify your mixer valve combination:
Flow regulators are supplied for installation on high pressure systems (above 0.5 bar). For gravity fed or
other low pressure systems do not fit the flow regulator.
Mixer Valve
Shower
Fittings
Flow Regulator
Flow Rate
Colour
Comments
Rada V10 Exposed
n/a
6 L/Min
Black
Supplied in the component pack,
designed to be fitted in the shower
valve outlet
Rada V10 Concealed
n/a
6 L/Min
Black
Supplied in the component pack,
designed to be fitted in the RAC
assembly
Rada V10 Contract Pack
VR145
6 L/Min
Black
A 9 l/min flow regulator is pre-fitted
inside the VR145 showerhead. For
additional water saving remove
the 9 l/min regulator (refer to the
VR Product Manual) before fitting
the 6 l/min flow regulator in the
valve outlet.
For further information on how and where to fit the flow regulator, refer to section:
‘Flow Regulators’
page 17
.
9 L/Min
Orange
9 L/Min
9 L/Min
Orange
Orange
