9
The Rada 425-t3 mixing valve does not have integral flow control, appropriate provision
must be made for this in the outlet pipework.
This can be in the form of basin/bath tap, stop-cock, mechanical timed-flow controller
or solenoid.
The device chosen must be
non-concussive
in operation.
Flow Control
Connections
Rada 425-t3 c -
inlets and Outlet: 1" BSP female/28 mm compression. Angle inlet
checkvalve elbows rotate to accept rising, falling or rear-fed
supplies.
Standard connections are:
hot
-
left (marked red)
cold
-
right (marked blue)
outlet
-
top (can be altered to bottom outlet
if required by repositioning the drain
plug)
This model can operate in any plane, provided hot and cold pipework is connected to
the appropriate inlets (hot - red, cold - blue).
