W W W . R A D P O W E R B I K E S . C O M
4
Assembly Instructions
NOTICE:
The following assembly steps are only a general guide to assist in the assembly of your Rad Power Bike and is not a complete or comprehensive
manual of all aspects of assembly, maintenance and repair. We recommend you consult a bicycle repair specialist to assist in the assembly, repair and
maintenance of your bicycle.
Step 1:
Remove bike from carton and carefully set out all contents of the box. Remove packaging material protecting the
bicycle frame and components. Ensure the following pieces are included in the package. If there are any missing parts please
contact Rad Power Bikes for help replacing missing pieces.
1.
RadWagon
2.
Front Wheel
3.
2x running boards
4.
Center Kickstand
5.
Front fork anti-rotation spring and plastic cover
6.
Pedals (Left and Right)
7.
Front headlight
8.
Charger
9.
Keys for battery pack
10.
Assembly tools and manuals.
11.
Seat and seat post
Step 2:
Assemble Kickstand onto bike using provided hardware as shown in the assembly video found here:
https://www.youtube.com/watch?v=QXyspHygRVI
Step 3:
Install the handlebars onto the stem by removing the two bolts holding on the stem cap. Ensure the cables and wires
running up to the handlebar are not tangled or wrapped and then place the handlebar centered on the stem with the
