W W W . R A D P O W E R B I K E S . C O M
10
o
Avoid charger contact with liquids, dirt/debris or metal objects.
o
Store the charger in a location where it cannot suffer damage from falls/impact.
o
The charger should only be used indoors in a dry ventilated space.
o
If you notice a strange smell or the charger or battery are overheating, please stop charging and contact Rad Power
Bikes.
o
Do not yank or pull on the cables of the charger. When unplugging carefully remove both the AC and DC cables by way
of pulling on the plastic plugs, not pulling on the cables.
Please take special care in charging of your Rad Power Bike in accordance with the above procedures and safety
information. Failure to follow proper charging procedures can result in damage to your Rad Power Bike, charger, personal
property and/or serious injury or death.
Operation
Start-Up Procedure
After the bike has been properly assembled following the unboxing video and all components are secured correctly, you may
now proceed to start up the vehicle and select the drive mode and power level.
Notice:
Do not perform any of the steps in the Operation section of this manual until you have read this entire manual since
there are important details in the following sections, especially related to safety.
o
Install the key and secure the battery pack to the frame mount, turning in the clockwise direction. Remove the key and
test to see the battery cannot be removed before proceeding.
o
Depress the power button on the battery. The blue light should now be illuminated on the button indicating it is
turned on.
o
Hold down the center mode button on the remote display toggle switch for 2 seconds then release, the LCD readout
should turn on.
