Fig. 3.3: PC address setting
Note:
When you change the RipEX ETH address from the default value later on and the new IP
network does not include the default one, you will have to change your PC's static IP again to be
able to continue configuring the RipEX.
3.
Login to RipEX
Start a web browser (Mozilla Firefox, Internet Explorer – JavaScript enabled) on your PC and type
the RipEX’s default IP in the address line field:
•
10.9.8.7
– when connected via "X5" – an external ETH/USB adapter. IP address 10.9.8.7 is
fixed and cannot be changed; it is independent of the IP address of the RipEX’s Ethernet inter-
face.)
•
192.168.169.169
– when connected directly to ETH
Note
https
- For security reasons the communication between the PC and RipEX is conducted
using the protocol https with ssl encryption. The https protocol requires a security cer-
tificate. You must install this certificate into your web browser (Mozilla Firefox, Internet
Explorer). The first time you connect to the RipEX, your computer will ask you for au-
thorisation to import the certificate into your computer. The certificate is signed by the
certification authority Racom s.r.o. It meets all security regulations and you need not
be concerned about importing it into your computer. Confirm the import with all warnings
and exceptions that your browser may display during installation.
The login screen appears:
RipEX – Radio modem & Router – © RACOM s.r.o.
26
Demo Case – RipEX & M!DGE