3.2. Demo Case
Fig. 3.1: Demo case contents
3.2.1. Case contents
•
3× RipEX units (RipEX A, B and C)
•
1× M!DGE unit
•
1× Power supply Mean Well AD-155A
(100–240 VAC 50–60 Hz/13.8 VDC)
•
1× Backup battery (12 V/5 Ah, FASTON. 250), e.g. Fiamm 12FGH23
•
1× Power cable (European Schuko CEE 7/7 to IEC 320 C13)
•
1× Ethernet patch cable (3 m, UTP CAT 5E, 2× RJ-45)
•
1× Quick Start Guide
RipEX accessories
•
3× Dummy load antennas
•
1× L-bracket, 1× Flat-bracket samples
•
1× Fan kit
•
1× X5 – ETH/USB adapter
M!DGE accessories
•
1× Whip antenna (900–2100 MHz, 2.2dBi, vertical)
3.3. Programming RipEX via Computer
To configure a RipEX you can connect it to your PC in two ways:
1
http://www.racom.eu/download/hw/ripex/free/eng/7_supplies/MW_AD-155-spec.pdf
2
http://www.racom.eu/download/hw/ripex/free/eng/7_supplies/12FGH23.pdf
RipEX – Radio modem & Router – © RACOM s.r.o.
24
Demo Case – RipEX & M!DGE
