RACOM M!DGE2, Руководство пользователя

Страница: 163 / 189

8.4. Setting config parameters
The
set
command can be used to set configuration values.
> set -h
Usage:
set [-hv] <parameter>=<value> [<parameter>=<value>..]
Options:
-v validate config parameter
See the following example for setting configuration digital output values. Both values will be "off" and
both values will be also "off" after the next start-up procedure.
> set dio.out1=off
> set dio.out2=off
8.5. Updating system facilities
The update command can be used to perform various system updates.
> update -h
Usage:
update [-hfrsnbv] <software|config|firmware <module>|license|sshkeys> <URL>
Options:
-r reboot after update
-f force update
-n don't reset missing config values with factory defaults
-b update backup config
-s show update status
Available update targets:
software Perform software update
firmware <module> Perform module firmware update on upgradable module
config Update configuration
license Update licenses
sshkeys Install SSH authorized keys
8.6. Manage keys and certificates
The update command can be used to manage keys and certificates.
> cert -h
Usage:
cert [-h] [-p phrase] <operation> <cert> [<url>]
Possible operations:
163 © RACOM s.r.o. – M!DGE2 GPRS/UMTS/HSPA+/LTE router
Command Line Interface