RACOM M!DGE2, Руководство пользователя

Страница: 162 / 189

8.2. Print help
The
help
command can be used to get the list of available commands when called without arguments,
otherwise it will print the usage of the specified command.
> help
Usage:
help [<command>]
Available commands:
get Get config parameters
set Set config parameters
done Check done
update Update system facilities
cert Manage keys and certificates
status Get status information
scan Scan networks
send Send message, mail, techsupport or ussd
restart Restart service
debug Debug system
reset Reset system facilities
reboot Reboot system
shell Run shell command
dio DIO control
help Print help for command
no-autologout Turn off auto-logout
history Show command history
exit Exit
8.3. Getting config parameters
The
get
command can be used to get configuration values (not the current values).
get -h
Usage:
get [-hsvfc] <parameter> [<parameter>..]
Options:
-s generate sourceable output
-v validate config parameter
-f get factory default rather than current value
-c show configuration sections
See the following example for reading configuration DIO values:
> get dio.out1
dio.out1=on
> get dio.out2
dio.out2=on
M!DGE2 GPRS/UMTS/HSPA+/LTE router – © RACOM s.r.o. 162
Command Line Interface