RACOM M!DGE, Руководство по эксплуатации

Страница: 98 / 113

Usage and Return Value Command
Note
cli set <invalidKey>=<correctValue> returns no error
message
cli set <validKey>=< inCorrectValue> returns no error
message, no range check is performed
Not for end user use! Root rights are required. cli configure
Not for end user use! Root rights are required. cli configureAll
‘cli network’ provides mobile network information on the optionally
specified SIM card. If no SIM card is specified, the command is
cli network
applied to SIM1. The information returned includes the Local Area
Identity (LAI)
Usage: network [sim1/sim2]
Example: cli network sim1
‘cli set’ produces no return value and no error message. To check
if the modification took place, use ‘cli get’
Note
The following commands are identical:
‘cli network’ and ‘cli network sim1’
‘cli select automatic’ sets the network selection mode for the spe-
cified SIM card to automatic.
Usage: select automatic [sim1/sim2]
cli select automatic
Note
The following commands are identical:
‘cli select automatic’ and ‘cli select automatic sim1’
The following commands have the same effect:
‘cli select automatic sim1’ and ‘cli set networkselec-
tion.mode=automatic’
‘cli select automatic sim2’ and ‘cli set networkselec-
tion.sim2.mode=automatic’
GPRS/EDGE/UMTS routersM!DGE, MG102 – © RACOM s.r.o. 98
Configuration