RACOM M!DGE, Руководство по эксплуатации

Страница: 82 / 113

Description Para-
meter
Download the recommended TFTP server “TFTPD32” from our website, install it on your
PC and start it.
Configure the TFTP server as follows:
-In the dialog „Tftpd32: Settings“ choose the base directory (e.g. „C:\TFTP“). Create a
new directory if there is none.
- Unpack the new software to this directory into a subfolder such as 3.3.1.2135
4.
On the web page “SYSTEM
➝
Manual Software Update” enter the IP address and path of
the TFTP server (192.168.1.2) as follows:
5.
Press [Apply] and confirm by pressing [OK].
Wait until the update is complete. See the progress bar
Do not unplug the power connector during the update!
6.
Check the results of the update. Refreshing the page or even reopening the browser
windows may avoid cache problem. In case of success, “software update successfull” will
be displayed, otherwise an error message.
7.
GPRS/EDGE/UMTS routersM!DGE, MG102 – © RACOM s.r.o. 82
Configuration