Racing RACSBE2652, Оригинальное руководство пользователя

Страница: 8 / 17

A The machine should be checked whether inner and outer blade cover
、
left
and right side table moving cover
、
inner and outer flange of blade and blade
are proper before operation.
B Pushing the moving worktable forward and check whether left and right table
moving cover and inner and outer blade touch each other so as to avoid
unnecessary damage, while the log saw is working after turning-on the power.
C Please turn off the power supply after using, cleaning the machine, save at
dry airiness place.
Remove plug from mains before maintenance or if cord is damaged
WARNING! Electricity - Risk of electric shock.
Warning symbol
Use a protection for face
SAFE WORKING PRACTICE
It is essential all operators are:
-
Adequately trained in the use, adjustment and operation of the machine;
-
Instructed in factors that influence exposure to noise e.g.:
 saw blade designed to reduce the emitted noise;
 saw blade and machine maintenance.
-
Informed of factors that influence exposure to dust e.g.:
 type of material being machined;

importance of local extraction(capture at source);
 proper adjustment of hoods/baffles/chutes;
 where provided, dust extraction equipment to be switched on before
commencing machining.
It is important that:
-
During operation the machine is standing on level, horizontal ground and
that the floor area around the machine is level, well maintained and free
from loose material e.g. chips and off-cuts;
-
Adequate general or localized lighting is provided;
-
Stock and finished workpieces are located close to the operator’s normal
working position.
It is essential for the operator to:
-
Use a push block or push stick to avoid working with the hands close to the
saw blade when using a dual purpose circular sawing machine for
firewood/circular saw bench in the saw bench mode;