-
Only saw blades made in conformity to EN 847-1:1997 shall be used on the
machine;
-
The machine during indoor use shall be connected to an external chip and
dust extraction system;
-
A Residual Current Device (RCD) should be used
INTENDED USE
This machine is only intended for cutting firewood as detailed in these
instructions. Unspecified use, modifications to the machine, or use of parts not
tested and approved by the equipment manufacturer may cause
unforeseeable damage!
This machine is intended for operation by ONE person. Other persons shall
keep a sufficient distance to the machine.
TECHNICAL SPECIFICATIONS
Voltage
230V~ 50Hz
Protection class
IP54
Power input
2600W (S6, 40%)
Rated speed
2800 min
-
1
Saw blade
Ø505 × Ø30 × 3.6mm x 40T
Cutter Capacity
Ø30-170mm
Machine weight
76kg
Sound pressure level LpA:
91 dB(A) K=2 dB(A)
Sound power level LwA:
105 dB(A) K=2 dB(A)
Measured sound values determined according to EN ISO 3744
The noise figures quoted are emission levels and are not necessarily safe
working levels. Whilst there is a correlation between the emission and
exposure levels, this cannot be used reliably to determine whether or not
further precautions are required. Factors that influence the actual level of
exposure of work-force include the characteristics of the work room, the other
sources of noise, etc. i.e. the number of machines and other adjacent
processes, and the length of time for which an operator is exposed to the noise.
Also the permissible exposure level can vary from country. This information,
however, will enable the user of the machine to make a better evaluation of the
hazard and risk.
Wear hearing protection!
Pay attention to the factors that influence exposure to noise, this includes:
-
Use saws blades designed to reduce the emitted noise
-
Maintain saw blade and the machine properly
1. Open package and take out all parts. (see picture 1)
Содержание RACSBE2652
Страница 2: ......
