Racing RACSBE2652, Оригинальное руководство пользователя

Страница: 16 / 17

Every 50 hours of operation
-
Check all screwed connections, tighten if necessary (Rocker and rocker
stop must remain movable)
STORAGE
-
Store the manual close to the machine.
-
Always wait the appliance cool down before storage.
-
Always store the log saw in a dry area.
-
Wipe the log saw clean with a brush. Apply a thin layer of oil using an oily
cloth to protect the machine from rust, before storage.
TROUBLESHOOTING TABLE
Warning: In the interests of operational safety, always switch off the saw
and remove the mains plug before carrying out maintenance work.
Problem Possible Cause Help
Saw blade gets loose
after turning off the motor Fastening nut tightened
insufficiently Tighten fastening nut,
M20 left-handed thread
Motor does not start a) Failure mains fuse
b) Extension cable
defect
c) Connections on the
motor or switch defect
d) Motor or switch defect a) Check the mains fuse.
b) Replace extension
cord
c) Have a mechanic
check by a professional
d) Have a mechanic by a
professional
No motor output turns off
automatically Overload by dull saw
blade, thermo protection
is triggered Insert a sharpened saw
blade; motor can be
turned on again after the
cooling period
Burns on the cutting
surface a) Fastening nut
tightened insufficiently
b) Wrong saw blade
a) Insert a sharpened
saw blade
b) Insert saw blade with
20 or 28 teeth for
longitudinal cuts