background image

WARRANTY

The manufacturer guarantees the product against defects in material and workmanship for a period of 2 

years from the date of the original purchase. The warranty only applies if the product is for household use. 

The warranty does not cover breakdowns due to normal wear and tear.

The  manufacturer  agrees  to  replace  parts  identified  as  defective  by  the  designated  distributor.      The 

manufacturer does not accept responsibility for the replacement of the machine, in whole or in part , and/or 

ensuing damage.

The warranty does not cover breakdowns due to:

• 

insufficient maintenance.

• abnormal assembly, adjustment or operations of the product.
• parts subject to normal wear and tear.

The warranty does not extend to:

• shipping and packaging costs.
• using the tool for a purpose other than that for which it was designed.
• the use and maintenance of the machine done in a manner not described in the user manual.

Due to our policy of continuous product improvement, we reserve the right to alter or change specifications 

without  notice.  Consequently,  the  product  may  be  different  from  the  information  contained  therein,  but  a 

modification  will  be  undertaken  without  notice  if  it  is  recognized  as  an  improvement  of  the  preceding 

characteristic.

READ THE MANUAL CAREFULLY BEFORE USING THE MACHINE.

When ordering spare parts, please indicate the part number or code, you can find this in the spare parts list 

in this manual. Keep the purchase receipt; without it, the warranty is invalid. To help you with your product, 

we invite you to contact us by phone or via our website:

• 

+33 (0)9.70.75.30.30

• 

https://services.swap-europe.com/contact

You must create a "ticket" via the web platform.

• Register or create your account.
• Indicate the reference of the tool.
• Choose the subject of your request.
• Describe your problem.
• 

Attach these files: invoice or sales receipt, photo 

of the identification plate (serial number), photo 

of the part you need (for example: pins on the 

transformer plug which are broken).

WARRANTY

21

Содержание RACBTE800
























Отзывы: