14
THE MIXING BLADES
Mount the mixing blades inside the bottom drum loosely as shown - Two holes
are provided at the base of the drum into which a M10X20 cross headed screw
may be inserted from the outside.
A leather washer,
flat washer, lock washer and a nut should be threaded on
loosely on the inside
.the leather washer should be placed under the blade
down against the drum
.
NOTE: Two arrows are labeled on upper drum and bottom drum to make their
position relation. If you have any difficulty in correctly positioning the mixing
blades, it is helpful if you temporarily mount the upper drum on the top of the
bottom drum, rotating it so that the two arrows line up.
THE UPPER DRUM
