Racing RACBTE800-A, Руководство пользователя

Страница: 16 / 24

9.3 LOADING
Completely unwind the extension cord. Connect it to the concrete
mixer first before plugging in power supply.
Always start the mixer before loading the drum. Loading the drum
with drum rotating.
Do not throw material into the mixer to avoid sticking firmly to the
back of the drum. Trickle it steadily over the ram.
NOTE: A built-in thermal protector is arranged in the motor to prevent it
from overheating. The thermal protector restores automatically when the
motor cools down.
For best results, proceed as follows:
1. Add the required amount of gravel into the drum.
2. Add the required amount of cement into the drum.
3. Add the required amount of sand into the drum.
4. Pour the required amount of water into the drum.
9.4 EMPTYING
Do not turn mixer off while full of load. Emptying the drum with
drum rotating.
9.5 CLEANING
Never put hands inside the drum with drum rotating.
Thoroughly clean the mixer at the end of each day’s operation. Keep
your mixer clean. The slightest trace of material left in the drum will harden and
attract more each time you use it until the machine is useless. Dried cement
should be scraped out of the drum. Do not throw bricks into mixer drum to clean
it out. Do not beat on the drum with a shovel, a hammer or other tools to break
up accumulations of dried cement mix, as damage to the mixer may result. The
drum may be scoured for approximate 2 minutes, using 1” gravel and water
mixture. Then discharge the gravel/water mixture and hose down the drum
assembly inside and out. The construction of protection class IP44 of the
concrete mixer allows you to safely water the drum.
Do not pour or spray water directly over the motor cover, especially
the openings in it.
Wipe off any external material on the motor cover. Do not use petrol,
turpentine, lacquer or paint thinner, dry cleaning fluids or similar
products. The use of chemical products or solvents may affect
the properties of the cover which was made of high density
polyethyiene PET.
16