Racing RAC49CS4T, Руководство пользователя

Страница: 25 / 32

8.2 TRANSPORT
Clean coarse dirt off the equipment with a brush or hand brush. Alway mount the chain guard (20) to the chain
bar (1).
9. DISPOSAL AND RECYCLING
The equipment is supplied in packaging to prevent it from being damaged in transit.
The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made
of various types of material, such as metal and plastic. Never place defective equipment in your household
refuse. The equipment should be taken to a suitable collection center for proper disposal. If you do not know
the whereabouts of such a collection point, you should ask in your local council offices.
10. TROUBLESHOOTING
The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your
equipment fails to work properly. If the problem persists after working through the list, please contact your
nearest service workshop.
IMPORTANT!
Hint in case of sending the equipment to a service centre:
Due to safety reasons please see to it that the equipment is sent back free of oil and petrol.
Problem Probable cause Corrective Action
Unit won’t start or starts
but will not run.
Incorrect starting procedures. Follow instructions in the User
Manual.
Incorrect carburettor mixture adjustment
setting. Have carburettor adjusted by an
Authorized Service Center.
Fouled spark plug. Clean / gap or replace plug.
Fuel filter plugged. Replace fuel filter.
Engine hesitates. Incorrect carburettor mixture adjustment
setting. Have carburettor adjusted by an
Authorized Service Center.
No power under load. Incorrectly gapped spark plug. Clean / gap or replace plug.
Runs in the wrong way Incorrect carburetor mixture adjustment
setting. Have carburettor adjusted by an
Authorized Service Center.
Poor performance
when operated Blunt chain. Loose chain. Sharpen or replace the chain.
Tension the chain.
Engine dies Empty petrol tank.
Fuel filter in the
wrong position in the tank. Fill up the petrol tank.
Completely fill the petrol tank or
re-position the fuel filter in the petrol
tank.
Insufficient chain
lubrication
(the cutter rail and chain
get hot) Empty oil tank for the chain. Top up the oil tank for the chain.
Oil lubrication openings moved. Clean the oil lubrication hole in the
cutter bar.
Clean the groove in the cutter bar.
25